The Kramer VP-61N is a 6×1 switcher for VGA/XGA . It is designed to route one of up to six inputs to one output using 15pin HD female connectors. Bandwidth exceeding 400MHz ensures transparent VGA/XGA performance. The inputs and output are directly coupled, and conform to the highest standards.The VP-61N can be controlled by front panel switches, or remotely by RS-232 serial commands transmitted by a touch screen system, personal computer, or other serial control device. It is housed in a rugged, professional rack mountable enclosure. Technical Specifications INPUTS: 6 Analog Red, Green, Blue signals – 0.7 Vpp/75 Ohm, H & V syncs, TTL level on HD15F connectors. OUTPUT: One Analog Red, Green, Blue signal – 0.7 Vpp/75Ohm, H & V syncs, TTL level on a HD15F connector. BANDWIDTH: 400 MHz -3dB. (video) 100kHz -3dB (audio) SWITCH TIME: Less than 5ms. SWITCH CONTROL: Six electronic illuminated touch switches with electronic interlock. RS-232 via an additional DB-9 connector on rear panel. COUPLING: Direct. DIMENSIONS: 19 inch (W), 7 inch (D) 1U (H) rack mountable. POWER SOURCE: 230 VAC, 50/60 Hz, (115VAC, U.S.A.) 3 VA. WEIGHT: 2.7 kg. (6 lbs.) approx. ACCESSORIES: Power cord, Windows control software.
"Guys were very helpful and did a good job, Thanks very much for doing it at such short notice"