Large format line array at its best. We love J series and so do almost every sound engineer world wide.
Can be used as smaller ground stacked systems or as part of large flown arrays the J12 is the wider coverage brother to the J8 and also makes a great under hang fill.
Our J series is deployed either as single boxes on wheel boards or on four way carts ready to work. We also stock J series frames and soca cable solutions to touring racks. We are always happy and able to supply full turnkey systems.
Every J loudspeaker leaves us prepped to factory standards.
The d&b Audiotechnik J12 is a 3-way design housing 2 x 12″ LF drivers, one hornloaded 10″ MF driver and two 1.4″ exit HF compression drivers with 3″ voicecoils mounted to a dedicated wave-shaping device. The mechanical and acoustical design enables flown vertical columns of up to twenty-four loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution
|Components||2 x 12″ / 1 x 10″ driver / 2 x 1.4″ exit compression driver|
|Max. sound pressure (1m, free field) with D12||143 dB SPL|
|Power handling capacity LF (RMS / peak 10 ms)||500 / 2000 W|
|Power handling capacity MHF (RMS / peak 10 ms)||200 / 800 W|
|Frequency response (-5 dB)||48 / 85 Hz – 17 kHz|
|Nominal dispersion angle (horizontal)||120°|
|Splay angle settings||0 – 7° ( 1° increment)|
|Cabinets per D12||2|
|Dimensions mm (h x w x d)||360 x 1100 x 570|
|Dimensions inch (h x w x d)||14.2 x 43.3 x 22.4|
"My Agency have worked with Phonophobia Group many times. I have always found the team to be reliable, professional and work until the job is done to perfection. I would not hesitate to recommend them for any job . From a small corporate event to a major festival these are the guys you want on your side!"